List of papers
- 1."Solubility and Diffusivity of Carbon Dioxid in Aqueous Slurries
of Kaolin"
- Hikita,H., K.Ishimi, K.Ueda and S.Koroyasu
- Industrial & Engineering Chemistry Process Design and Development,
Vol.24 No.2 pp.261-264 (1985)
- 2."Gas Absorption Accompanied by an Instantaneous Irreversible
Reaction in Laminar Falling Filmes of Pseudo-Plastic Liquids"
- Hikita,H., K.Ishimi and S.Koroyasu
- The Canadian Journal of Chemical Engineering, Vol.63, No.3 pp.522-524
(1985)
- 3."Flow of Liquids in Entrance Region of Wetted-Wall Columns
with an Overflow-Type Distributor"
- Ishimi,K., S.Koroyasu and H.Hikita
- Bulletin of the University of Osaka Prefecture Series A, Vol.35,
No.1, pp.75-83 (1986)
- 4."Gas Absorption Accompanied by an Instantaneous Irreversible
Reaction in Laminar Falling Filmes of Pseudo-Plastic Liquids"
- Hikita,H., K.Ishimi and S.Koroyasu
- Bulletin of the University of Osaka Prefecture Series A, Vol.35,
No.2, pp.159-167 (1986)
- 5."Entrance Region Flow of Falling Liquid Films in Inclined
Wettd-Wall Columns with an Overflow-Type Distributor"
- Hikita,H., K.Ishimi and S.Koroyasu
- Journal of Chemical Engineering of Japan, Vol.20, No.2, pp.172-176
(1987)
- 6."傾斜濡れ壁塔における流下液膜の波動特性と波立ち開始点"
- 石見紘策, 頃安貞利, 疋田晴夫
- 化学工学論文集, 第13巻, 第5号, pp.649-656 (1987)
- 7."Mass Transfer in Creeping Flow Past Periodic Arrays of Cylindrers"
- Ishimi,K., S.Koroyasu and H.Hikita
- Journal of Chemical Engineering of Japan, Vol.20, No.5, pp.492-498
(1987)
- 8."Gas Desorption from Falling Liquid Films in Entrance Region
on Inclined Wetted-Wall Columns with An Overflow-Type Distributor"
- Hikita,H., K.Ishimi and S.Koroyasu
- Chemical Engineering Science, Vol.45, No.2, pp.437-442 (1990)
- 9."Effect of a Row of Cylindrical Obstructions on Mass Transfer
in Creeping Flow in a Plate-Type Membrain Separator"
- Ishimi,K., S.Koroyasu H.Ishikawa, and H.Hikita
- The Canadian Journal of Chemical Engineering, Vol.68, No.1, pp.162-166
(1990)
- 10."傾斜濡れ壁塔での助走区間における流下液膜の流動"
- 石見紘策, 今村毅, 頃安貞利, 松浦敏郎, 疋田晴夫
- ,化学工学論文集, 20, pp.299-301, 1994
- 11."円柱砂型鋳物の凝固時間に及ぼす隣接鋳物からの熱移動の影響"
- 松田政夫, 頃安貞利, 横山康雄
- 鋳物, 67, pp.24-29, 1995
- 12."ショット充てん消失模型鋳造法によるアルミニウム合金鋳物の機械的性質"
- 松田政夫, 頃安貞利
- 鋳物, 67, pp.447-451, 1995
- 13."ショット充てん消失模型鋳造法による鋳物の冷却性能に及ぼす塗型膜の影響"
- 頃安貞利, 松田政夫
- 鋳造工学, 68, pp.307-312, 1996
- 14."消失模型鋳造法における各種充てん物の冷却性能"
- 頃安貞利, 松田政夫
- 鋳造工学, 68, pp.949-955, 1996
- 15."Effect of Progressive waves on a Liquid Surface upon Gas
Absorption in Unsteady State"
- Ishimi,K., S.Koroyasu and H.Hikita
- Journal of Chemical Engineering of Japan, Vol.30, No.1, pp.154-158
(1997)
- 16."拡散対の濃度均一化課程に生ずる多層拡散の数値解析"
- Shinji. Tsuji and S. Koroyasu
- 日本金属学会誌論文, Vol.61, No.1 pp.8-17 (1997)
- 17."注湯機の傾動軸迅速昇降装置による流量最適化の試み"
- Matsuda, M and S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.69, No.3, pp.207-212, 1997
- 18."傾動軸迅速昇降自動注湯機による湯口系溶湯流れの実験的研究"
- Matsuda, M and S. Koroyasu
- Journal of Journal of Japan Foundry Engineering Society, Vol.69, No.9, pp.731-736, 1997
- 19."Gas Absorption into Liquid Flowing with Progressive waves"
- Ishimi,K. and S.Koroyasu
- Journal of Chemical Engineering of Japan, Vol.31, No.1, pp.138-141
(1998)
- 20."Kinetic Analysis of the Growth Rate of the Flagellar Hook
in Salmonella Typhimurium by the Population Balance Method"
- S. Koroyasu, M. Yamazato, T. Hirano and S. Aizawa
- Biophysical Journal, Vol.74, No.1 pp.436-443 (1998)
- 21."傾動軸迅速昇降機構を有する自動注湯機からの流量計算法"
- 松田政夫, 頃安貞利
- Journal of Japan Foundry Engineering Society, Vol.71, pp.3-8, (1999)
- 22."自動注湯機の傾動軸2段昇降装置による初期流量増大化の試み"
- 松田政夫, 頃安貞利
- Journal of Japan Foundry Engineering Society, Vol.71, pp.437-442, (1999)
- 23."金型鋳造法における平板状アルミニウム合金鋳物の凝固時間"
- 頃安貞利, 松田政夫
- Journal of Japan Foundry Engineering Society, Vol.71, pp.529-535, (1999)
- 24."消失模型鋳造法における凝固時間に及ぼす鋳枠内減圧通気の影響"
- 頃安貞利, 松田政夫
- Journal of Japan Foundry Engineering Society, Vol.72, pp.7-11, (2000)
- 25."ショット充てん消失模型鋳造法における充てん時の模型の変形"
- 頃安貞利, 松田政夫
- Journal of Japan Foundry Engineering Society, Vol.72, pp.458-463, (2000)
- 26."チタンアルミナイド金属間化合物エッジ仕上げ時のかけ/バリの生成条件"
- 古沢利明, 日野 裕, 辻 新次, 市川 睦, 頃安貞利
- 砥粒加工学会誌, Vol.44, pp.448-454, (2000)
- 27."TiAl金属間化合物の機械的強度に及ぼす切削時のエッジおよび仕上げ面の影響"
- 古沢利明, 市川 睦, 日野 裕, 辻 新次, 頃安貞利
- 日本機械学会論文集C編, Vol.66, pp.3766-3771, (2000)
- 28."Mechinability of TiAl intermetallic Compounds"
- T. Furusawa, A. Ichikawa, H. Hino, S. Tsuji, S. Koroyasu
- 10th International Conference on Precision Engineering, pp.278-293, (2001)
- 29."砥粒加工をしたTiAl金属間化合物の機械的強度に関する研究"
- 古沢利明, 市川 睦, 日野 裕, 辻 新次, 頃安貞利
- 砥粒加工学会誌, Vol.45, pp.539-545, (2001)
- 30."消失模型鋳造法における各種充てん物の振動鋳枠内の充てん特性"
- 頃安貞利, 松田政夫, 小池勝美
- Journal of Japan Foundry Engineering Society, Vol.74, pp.23-29, (2002)
- 31."消失模型鋳造法における振動鋳枠内での模型の変形"
- 頃安貞利, 松田政夫, 小池勝美
- Journal of Japan Foundry Engineering Society, Vol.74, pp.720-726, (2002)
- 32."石こう鋳型と紙積層造形模型を用いた消失模型鋳造法における鋳物の寸法変化"
- 頃安貞利, 相馬宏之, 小池勝美
- Journal of Japan Foundry Engineering Society, Vol.75, pp.829-834, (2003)
- 33."消失模型鋳造法における充てん物の物性と振動充てん特性"
- 頃安貞利, 松田政夫
- Journal of Japan Foundry Engineering Society, Vol.76, pp.2-8, (2004)
- 34."窒化および酸化処理により表面改質した合金工具鋼の溶融アルミニウム合金に対する耐食性"
- 辻 新次, 浜瀬修先, 戸室康二, 頃安貞利, 古沢利明
- Netusu Shori, Vol.44 pp.31-36, (2004)
- 35."消失模型鋳造法におけるアルミニウム合金の冷却速度に及ぼす塗型の断熱性評価"
- 頃安貞利, 松田政夫
- Journal of Japan Foundry Engineering Society, Vol.76, pp.679-686, (2004)
- 36."消失模型鋳造法における湯流れ中の溶湯温度と塗型の断熱性"
- 頃安貞利, 松田政夫
- Journal of Japan Foundry Engineering Society, Vol.76, pp.687-694, (2004)
- 37."Generation of Defects Due to Machining of TiAl Intermetallic Compound and Their Effects on Mechanical Strength"
- T. Furusawa, H. Hino, S. Tsuji, S. Koroyasu and A. Ichikawa
- Transactions of the ASME, Vol.126, pp.506-514, (2004)
- 38."Restraint of the Burr when Cutting of Austenite Stainless Steel by the Application of Magnetic Field Assisted Method"
- T. Furusawa, S. Tsuji, S. Koroyasu, H. Yamaguchi and T. Shinmura
- The 3rd International Conference on Leading Edge Manufacturing in 21st Century, October 19-22, 2005, Port Messe Nagoya, Nagoya, Japan
- 39."消失模型鋳造法によるマグネシウム合金の鋳造性に及ぼす減圧度と塗型通気度の影響"
- K. W. Lee, G. S. Cho, K. H Choe, H. H. Jo, 池永明, 頃安貞利
- Journal of Japan Foundry Engineering Society, Vol.77, pp.841-846, (2005)
- 40."凝固解析における凝固特性に及ぼす過冷度の影響"
- 頃安貞利, 松田政夫
- Journal of Japan Foundry Engineering Society, Vol.78, pp.7-12, (2006)
- 41."Mold Filling Model in Expendable Pattern casting Process"
- S. koroyasu
- The 2nd International Congress on Expendable Pattern Casting Technology in China, Dujiangyan city, Sichuan, China, pp.422-425 (2006)
- 42."Effects of Reduced Pressure and Coat Permeability on Casting Characteristics of Magnesium Alloy in Evaporative Pattern Casting Process"
(This Paper was Originally Published in Japanese in J. JFS 77 (2005) 841-846)
- K. W. Lee, G. S. Cho, K. H Choe, H. H. Jo, A. Ikenaga, S. koroyasu
- Materials Transactions, Vol.47, pp.2798-2803, (2006)
- 43."Study of the Interface Between Steel Insert and Aluminum Casting in EPC"
- K .H .Choe, K. S. Park, B. H. Kang, G. S. Cho, K. Y. Kim, K. W. Lee, M. H. Kim, A. Ikenaga and S. Koroyasu
- J. Mater. Sci. technol., Vol.24, pp.60-64 (2008)
- 44."Effects of Coat Insulating and Permeability on Molten Aluminum Alloy Temperature during Mold Filling in Expendable Pattern Casting Process"
- S. koroyasu
- The 3rd China Lost Foam Casting International Conference, Baoji city, Shanxi, China, pp.8-12 (2008)
- 45."消失模型鋳造法におけるアルミニウム合金溶湯の簡易湯流れモデル"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.81, pp.377-383, (2009)
- 46."Effects of Sand Compaction and Reduced Pressure on Dimensional Change of Aluminum Alloy Casting in Expendable Pattern Casting Process"
- S. Koroyasu and A. Ikenaga
- The 4th International Conference on Lost Foam Casting Process in China, Yuncheng, Shanxi, China, pp.94-101, (2010)
- 47."Qualitative Discussion on Mold Filling and Thermal Decomposition of Model under Various Conditions in Full Mold Casting Process"
- N. Tamura, A. Ikenaga and S. Koroyasu
- The 4th International Conference on Lost Foam Casting Process in China, Yuncheng, Shanxi, China, pp.17-25, (2010)
- 48."Effect of Coat Permeability on Temperature Drop of Molten Aluminum Alloy during Mold Filling in Expendable Pattern Casting Process"
- S. Koroyasu and A. Ikenaga
- Materials Transactions, Vol.53, pp.224-228, (2012)
- 49."Study on Mold Filling of Molten Aluminum Alloy in Expendable Pattern Casting Process"
- S. Koroyasu and A. Ikenaga
- The 5th International Conference on Lost Foam Casting Technology in China, Tianjin, China, pp.11-19, (2012)
- 50."消失模型鋳造法におけるアルミニウム合金溶湯の湯流れに及ぼす鋳造方案と減圧の影響"
- 頃安貞利
- Journal of Japan Foundry Engineering Society, Vol.86, pp.447-453, (2014)
- 51."Effects of Casting Design and Reduced Pressure on Mold Filling of Molten Aluminum Alloy in Expendable Pattern Casting Process"
- S. Koroyasu
- Materials Transactions, Vol.55, pp.1820-1826, (2014)
- 52."Effect of Melt velocity on Density of Aluminum Alloy Casting in Expendable Pattern Casting Process"
- S. Koroyasu and A. Ikenaga
- The 6th International Conference on Lost Foam Casting Technology in China, Quanjiao, China, pp.23-29, (2014)
- 53."消失模型鋳造法におけるアルミニウム合金溶湯の湯流れ速度に及ぼす塗型通気度の影響"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.88, pp.192-197, (2016)
- 54."Effect of Coat Permeability on Melt Velocity of Molten Aluminum Ally in Expendable Pattern Casting Process"
- S. Koroyasu
- Materials Transactions, Vol.57, pp.1581-1586, (2016)
- 55."薄肉アルミニウム合金の消失模型鋳造法における湯流れに及ぼす塗型通気度の影響"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.88, pp.604-609, (2016)
- 56."Mold Filling in Expendable Pattern Casting Process of Thin Wall Aluminum Alloy Casting"
- S. Koroyasu and A. Ikenaga
- Transactions of 22th Annual Conference on Lost Foam, V Method and Full Mold Castiong Technology in China, Wuhu, China, pp.30-36, (2016)
- 57."Development of Vibration Flask and Application for Coat Tank in EPC Foundry"
- A. Ikenaga and S. Koroyasu
- Transactions of 22th Annual Conference on Lost Foam, V Method and Full Mold Castiong Technology in China, Wuhu, China, pp.25-29, (2016)
- 58."Effect of Coat Permeability on Mold Filling in Expendable Pattern Casting Process of Thin Wall Aluminum Alloy Casting"
- S. Koroyasu
- Materials Transactions, Vol.58, pp.635-640, (2017)
- 59."人工砂を用いた消失模型鋳造法における鋳型の熱吸収性と模型変形に及ぼす砂流動性の影響"
- S. Koroyasu, M. Norikuni, Y. Shimada
- Journal of Japan Foundry Engineering Society, Vol.89, pp.510-515, (2017)
- 60."Cooling Capacity of Mold and Deformation of Model depending on Sand Fluidity in Expendable Pattern Casting using Artificial Sand"
- S. Koroyasu, M. Norikuni, Y. Shimada and A. Ikenaga
- Transactions of 23rd Annual Conference on Lost Foam, V Method and Full Mold Castiong Technology in China, Yinchuan, China, pp.22-31, (2017)
- 61."消失模型鋳造法における振動塗型槽を用いた場合の塗型付着性に及ぼす振動条件の影響"
- A. Ikenaga, S. Kinugawa and S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.90, pp.11-16, (2018)
- 62."Effect of Artificial Sand Filling on Appearance and Dimensional Accuracy of Casting in Expendable Pattern Casting Process"
- S. Koroyasu and A. Ikenaga
- Transactions of 24th Annual Conference on Lost Foam, V Method and Full Mold Castiong Technology in China, Longyan, China, pp.31-36, (2018)
- 63."アルミニウム合金消失模型鋳造法の湯流れに及ぼす減圧と鋳造方案及び液状樹脂伝熱抵抗の影響"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.91, pp.737-742, (2019)
- 64."Effect of Vibration Condition on Appearance of Casting in Expendable Casting Process using Artificial Sand"
- S. Koroyasu and A. Ikenaga
- 2019' 25th Annual Conference on Lost Foam, V-Process and Full Mold Castiong Technology in Hefei, China, pp.43-49, (2019)
- 65."薄肉アルミニウム合金の消失模型鋳造法における湯流れに及ぼす塗型の断熱性の影響"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.91, pp.743-746, (2019)
- 66."Effects of Reduced Pressure, Casting Design and Heat Transfer Resistance of Liquid Resin on Mold Filling in Expendable Pattern Casting Process of Aluminum Alloy"
- S. Koroyasu
- Materials Transactions, Vol.61, pp.528-533, (2020)
- 67."薄肉アルミニウム合金鋳物の消失模型鋳造法における湯流れに及ぼす減圧及び鋳造方案の影響"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.93, pp.121-127, (2021)
- 68."Effects of Reduced Pressure and Casting Design on Mold Filling in Expendable Pattern Casting Process of Thin Wall Aluminum Alloy Castings"
- S. Koroyasu
- Materials Transactions, Vol.62, pp.1569-1575, (2021)
- 69."消失模型鋳造法におけるアルミニウム合金鋳物の密度に及ぼす湯流れ速度の影響"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.94, pp.728-734, (2021)
- 70."Effect of Melt Velocity on Density of Aluminum Alloy Castings in Expendable Pattern Casting Process"
- S. Koroyasu
- Materials Transactions, Vol.63, pp.629-635, (2022)
- 71."アルミニウム合金鋳物の消失模型鋳造法における鋳型の熱吸収性に及ぼす砂種類の影響"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.94, pp.733-739, (2022)
- 72."消失模型鋳造法におけるアルミニウム合金鋳物の外観品質に及ぼす充てん砂種類と振動条件の影響"
- S. Koroyasu
- Journal of Japan Foundry Engineering Society, Vol.94, pp.740-747, (2022)
- 73."アルミニウム合金溶湯とフラン自硬性積層造形鋳型の接触状態によって変化する熱伝達係数の推定"
- 中村侑未,高木健輔, 寺山朗, 頃安貞利, 志賀英俊, 神戸洋史, 前田安郭, ムハマドハイリファイズ, 沖村泰彦, 永田益大, 岡根利光, 宮下朋之, 吉田誠
- Journal of Japan Foundry Engineering Society, Vol.95, pp.183-190, (2023)
- 74."Mold Filling in Expendable Pattern Casting Process with Branch Flow Channel"
- S. Koroyasu
- 2023' 27th Annual Conference on Lost Foam, V-Process and Full Mold Castiong Technology in Baoji, China, pp.225-230, (2023)
- 75."Effect of Sand Material Type on Heat Absorbing Properties of Mold in Expendable Pattern Casting Process of Aluminum Alloy Castings"(submitted)
- S. Koroyasu
- Materials Transactions, Vol.64, pp.***-***, (2023)